How To Reduce Your Home Heating Costs

Saving the planet and saving money go hand-in-hand when you reduce your home heating bill.

How To Make Your Bathroom Eco-Friendly

We waste more water and use more chemicals in our bathrooms than any other place in the house! Here's how to green yours up.

Why Recyling Isn't Enough

So, you separate your bottles, put your newspapers on the curb and you think you're saving the environment. While that's a good start at being green, you're not quite there. You may not be able to save the world, but we can all do our part.

How to Cut Home Heating Bills

Consumers will likely pay record prices to heat their homes this winter, up an average of 10.5 percent from last winter, says NEADA, a group of state energy aid officials. Now is the time to give your home a “check-up.” Here are seven tips from the Comfort Institute to make your home an energy sipper instead of a gas guzzler.

1. Ask your HVAC contractor to test your duct system for air leaks. Many assume that windows and doors are the major cause of a home’s energy wasting air leaks. But according to recent research by the Department of Energy (DOE), gaps, joints and disconnections in the typical home’s duct system are much more significant. The DOE states that the typical duct system loses 25 to 40 percent of the energy put out by the central furnace or heat pump. Authorities recommend sealing ducts with a brushed on fiber-reinforced elastomeric sealant. Duct tape usually dries out and fails. It turns out duct tape is great for many things, but sealing ducts isn’t one of them.

2. Ask your contractor to perform an Infiltrometer “blower door” test. The blower door is a computerized instrument originally invented by the Department of Energy. It pinpoints where your home’s worst air leaks are, such as duct leaks, and also measures how leaky the overall house is. Most homes have the equivalent of an open window in combined air leaks. Many heating contractors offer an Infiltrometer test as part of a “Home & Duct Performance Checkup” that also checks insulation levels and overall duct performance.

3. Have your heating system cleaned and tuned. A pre-season tune up is a great investment. It reduces the chances of breakdowns on cold winter nights, improves safety and more than pays for itself through more energy efficient operation. For a free report: “How to Identify a Good Heating and Cooling Contractor,” go to www.comfortinstitute.org.

4. Replace your furnace or heat pump air filter (or clean it if it is an electronic unit). Most systems need this done every month to ensure safe and efficient operation. Keep forgetting to do it? Ask your contractor for an extended surface area central air filter that only needs to be replaced once a year. It also does a far better job of keeping your equipment and the air in your home clean.

5. Close your fireplace damper. Did you remember to close it last time you used the fireplace? Shut it now or waste precious warm air all winter long.

6. Install a programmable set-back thermostat. Turning down the thermostat eight degrees for eight hours a day will save 8 percent on home heating costs. An easy way to take advantage of these savings is to lower the thermostat temperature while away from home or sleeping. Ask your heating contractor about new models which are much easier to program.

7. Consider replacing your old furnace or heat pump. Just like a car, heating and cooling equipment doesn’t last forever. Is your system more than 12 years old? Planning to stay in your home more than a few years? Many authorities recommend replacing it before it fails permanently. New units can pay for themselves over time as they are up to twice as energy efficient. However, government and utility research has found that over 90 percent of newly installed high efficiency systems have energy wasting mistakes. Today’s new equipment is drastically compromised if it is hooked up to bad ducts.

Do some homework before talking to contractors. For more information, visit www.energystar.gov and www.comfortinstitute.org. Print out the free Comfort Institute report “Tips and Secrets to Buying A New Heating and Cooling System.”

Courtesy of ARAcontent

How to Save Gas and Money

Gas prices got ya down? In this Cars You Want Web Exclusive, Ezra Dyer offers 5 simple tips to get more miles out of your gas tank and keep more money in your wallet.

How to Save Energy and Money

The Environmental Protection Agency says if every American changed just one light bulb to an Energy Star qualified bulb, we'd save enough energy to light 7 million homes. So what's the difference between a traditional incandescent bulb and an energy saving compact florescent?

Compact florescent light bulbs use 75 percent less energy than most standard bulbs and last up to 10 times longer. While the price of an Energy Star CFL may initially be greater, the EPA says the energy savings from the bulb more than makes up the difference. Using just one compact florescent can save you $30 on your energy bill over the course of a year. It's not just homeowners cashing in on the savings - corporations have begun getting in the act, as well.

The Bank of America Tower in Miami recently began switching to more efficient bulbs. When the town of Amherst, NY, updated some 100 buildings with - among other improvements - energy efficient lighting, the result was about three-quarters of a million dollars in savings each year.

How to Save Energy

Naomi Cleaver presents 10 ways to reduce your carbon emissions at home. They are all easy and will save you money, so take a look.

How to Improve Your Vehicle Gas Mileage

Air pressure, driving habits, grades of gasoline, and driving journals. What do they all have in common? They can all help you get more mileage from your tank. Learn the tricks here.

How to Save Money and Water Each Time You Flush

Everybody's saying the environment is going down the toilet. But simple fixes around the house can help prevent it. With one easy adjustment, you'll save money, water and the environment... one flush at a time.